All Product Platforms

BW A24 is a stabilizer specifically designed for UV-curable colored systems. Its primary function is to prevent or delay gelation during the storage and transportation of UV pigmented formulations. The recommended dosage in formulations is 0.5–2%.

BW A704 is a modified special acrylate monomer with good dilution, low yellowing and high precision and etc. Mainly used in 3D printing, UV bonding glue, UV ink etc.

BW A23 is a stabilizer for light-curing colored systems with the main feature of preventing or prolonging the gelling of UV tinted systems during storage and transportation. (Suggested formulation level: 0.5-2%).

BW A22 is a stabilizer for light-curing colored systems with the main feature of preventing or prolonging the gelling of UV tinted systems during storage and transportation. (Suggested formulation level: 0.5-2%).

BW A20 is a stabilizer for light-curing colored systems with the main feature of preventing or prolonging the gelling of UV tinted systems during storage and transportation. (Suggested formulation level: 0.5-2%).

Photoinitiator for UV-curable based coatings, adhesives, inks and printing plates. It is typically consumed in acrylate resins based systems in concentrations ranging from 1% to 4% by weight. It offers the advantage of good shelf stability, and fast and thorough cure of coatings. It is compatible with acrylate resins, acrylate monomers and oligomers for use in UV-curable systems. Suggested dosage: 3-7%. Precautions: Low operating temperatures may affect the solubility of the product. If insolubility occurs, it is recommended to heat and stir the mixture. The suggested temperature is around 40°C.

Photoinitiator 184 is a highly efficient, non-yellowing free radical Type I photoinitiator used for the UV polymerization of mono- or multi-functional acrylate monomers and oligomers. It is widely applied in overprint varnishes, plastic coatings, wood coatings, adhesives, lithographic inks, screen printing inks, flexographic inks, and electronic products. It is generally used in combination with other photoinitiators, and can also be used together with UV absorbers when required. The recommended addition level in the formulation is 2–5%.

1173 is a liquid photoinitiator for UV curing acrylic resin for coating wood, metal, paper and plastic…etc. It provides non-yellowing durability and longer shelf life for UV curable systems. It is very suitable for mixing with other photoinitiator. Recommended dosage is 1-4% w/w.

Good adhesion and toughness. Chemical resistance, good abrasion resistance.