German Ink Ordinance 2027: A Q4 Readiness Checklist for UV Ink Formulators
German Ink Ordinance 2027 takes effect on 1 January. See what UV ink formulators must verify, which evidence to request, and how to plan a Q4 to Q1 readiness.
On 1 January 2027 the German Ink Ordinance changes the question a UV ink formulator has to answer. It is no longer enough to show that every substance in the ink sits on a positive list. The compliance case has to be built on the finished food-contact article, and the transition window closes at the end of this year. For anyone supplying ink into the German market, the fourth quarter is the last practical period to line up documentation, re-check formulations and book migration testing. This article sets out what actually changes, how the German rules differ from the Swiss ordinance and EU 10/2011, and a Q4-to-Q1 readiness plan that assigns a concrete deliverable to each stage. It is written to industry framework documents that should be re-verified against the official text before use.
1. What changes on 1 January 2027
The German Ink Ordinance, usually shortened to GIO, moves from a transition period into enforceable application. The transition ends on 31 December 2026, so from 1 January 2027 the ordinance applies to printing inks placed on the German market for food-contact articles. The direction of travel is from an input-based check toward a demonstration at the level of the finished article.
Two ideas sit at the centre of that shift. The first is a positive list: a substance may only be used in a food-contact ink if it is listed or falls under an allowed derogation. The second is the object of the assessment. Where an earlier conversation could focus on the ink formulation alone, the GIO asks the supplier and converter to justify compliance of the final printed article, taking into account how the ink is used in the real packaging structure.
For a formulator the consequence is practical rather than philosophical. The same ink can be compliant in one print construction and problematic in another, because coverage, substrate, overprint varnish, drying and the presence of a functional barrier all change the migration picture. A statement written for the ink drum cannot automatically be carried over to every article printed with it.
2. How the three frameworks differ in scope
Switzerland, Germany and the EU food-contact rules overlap but are not interchangeable. Meeting one does not establish compliance with another, and a dossier assembled for a Swiss customer is not a GIO dossier. The table below compares the frameworks at a level useful for planning; the authoritative text is the current official publication for each jurisdiction.
| Framework | Territory and status | What is assessed | Planning implication |
|---|---|---|---|
| German Ink Ordinance (GIO) | Germany; transition ends 31 December 2026, applies from 1 January 2027 | Printing inks and the finished food-contact article; positive list and migration | Build the case on the final printed article, not the ink alone |
| Swiss ink ordinance | Switzerland; separate national rules | Focus on inks for non-direct food contact applications | Swiss compliance does not automatically answer GIO questions |
| EU 10/2011 framework | European Union; plastics food-contact materials | Plastic materials and articles, including permitted substances and migration | Useful reference, but a different legal object from the German ink rules |
| EuPIA guidance | Industry guidance, not legislation | Raw-material selection and good manufacturing practice for printing inks | Supports the evidence pack; does not replace the statutory requirement |
Framework comparison for planning only. Confirm territory, effective date and scope against the current official text before relying on it.
3. Positive lists and the evidence to request
Under a positive-list approach the burden of showing that a substance is permitted sits with the party putting the ink on the market. For a resin supplier that means being able to identify, for each ingredient offered into a food-contact formulation, whether it is covered and on what basis. A generic statement that a product is suitable for food packaging is not a substitute for a substance-level position.
The GIO also restricts substances that are carcinogenic, mutagenic or toxic for reproduction unless a specific derogation applies, and migration is assessed against a very low analytical detection limit. Formulators should therefore expect requests that go beyond the standard safety data sheet: written confirmation of the positive-list status of relevant components, the regulatory basis for any derogation, and a composition statement precise enough to let the ink maker build its own declaration.
4. From the ink drum to the finished article
A compliant ink is a necessary input but not the end of the argument. Migration is determined by the whole printed structure. The substrate may contribute its own substances; the printing process may leave residual monomers or photoinitiator fragments; overprint varnishes and laminates change what can migrate; and set-off in the reel or stack can move ink from a printed surface onto a food-contact surface.
This is why the GIO places weight on demonstrating compliance of the final article rather than relying only on the ink supplier's declaration. The formulator's evidence covers composition and the intended conditions of use, while the converter establishes coverage, cure, stacking and the presence or absence of a barrier. Both halves have to agree, and the description of the ink in the technical file must match the ink actually used in the migration test.
Plan the handover explicitly. Agree with each converter which article constructions are in scope, what maximum coverage and minimum cure are assumed, and whether a functional barrier is claimed. Those assumptions then become conditions on the supplier declaration, so the declaration is not silently used in a construction it was never meant to cover.
5. A Q4-to-Q1 readiness plan
The remaining weeks before the transition closes are best spent in a fixed order. Start with substance-level verification, then collect supplier evidence, then book migration testing, and only then issue or update declarations. Running these steps in parallel usually produces a declaration based on a formulation that later changes.
| When | Deliverable | Owner | Gate to move on |
|---|---|---|---|
| Early Q4 | Inventory of inks and components supplied into the German market | Formulator / ink maker | Every component has a named regulatory status to verify |
| Mid Q4 | Supplier confirmations for positive-list status and derogations | Procurement / regulatory | No unresolved component without a written position |
| Mid to late Q4 | Migration test booked on the intended article constructions | Converter / lab | Test articles match real ink, coverage and cure conditions |
| Late Q4 | Updated composition statement and declaration of compliance | Regulatory | File description matches the formulation to be shipped |
| Early Q1 | Re-verified cure, adhesion and odour on production settings | Process / QC | Performance passes with the compliant formulation |
Readiness plan template. Dates, responsibilities and test conditions should be adapted to your own organisation.
6. What to re-check after a formulation change
Replacing a photoinitiator or a reactive diluent to satisfy the positive list is a formulation change, not an administrative edit. The cured film can cure at a different rate, develop different odour, or interact differently with the substrate, and each of those can affect the migration result. Treat the substitution as a new qualification.
At minimum, repeat surface and through cure at production speed, re-check adhesion and rub resistance on the real substrate, review odour and any residual extractables, and repeat the migration test on the finished article. Then update the composition statement and the declaration so that the file describes the ink that was actually tested. A version mismatch between the tested sample and the shipped material is one of the easiest findings for an auditor to raise.
| Re-verification item | Why it matters | How to check | Pass condition |
|---|---|---|---|
| Surface and through cure | A substituted initiator changes the cure profile | Cure a film at production settings | Both surface and depth pass your standard |
| Adhesion on the real substrate | Shorter cure or different shrinkage can weaken the bond | Run the named adhesion test | Passes before and after environmental exposure |
| Odour and residual extractables | Replacement components can leave different residues | Agree an odour or extractables check | Within the agreed internal limit |
| Migration on the finished article | The compliance case rests on the printed structure | Repeat the article-level test | Result supports the intended use conditions |
| Declaration and composition file | The file must describe what is actually shipped | Update and cross-check version numbers | No mismatch between sample and file |
Re-verification template. Conditions and limits come from your own process and the official text of the applicable rule.
Frequently asked questions
1. Does compliance with the Swiss ordinance satisfy the GIO?
No. The two regimes have different scopes, and the Swiss rules are directed mainly at non-direct food-contact applications. Treat them as separate assessments and keep two evidence trails rather than assuming mutual recognition.
2. Why does the finished article matter if my ink is compliant?
Because migration is determined by the printed structure, not only by the ink. Substrate, coverage, cure, overprint varnish, set-off and any functional barrier all influence what can reach food, so the article is the correct object of the assessment.
3. What should I ask a resin supplier for at this stage?
Ask for a substance-level regulatory position on the components offered into food-contact ink, the basis for any derogation, a composition statement precise enough to support your declaration, and written notice when that composition changes.
4. Can I keep using an existing stock of ink after 1 January?
That depends on how it is documented and used, not on the calendar alone. Verify the formulation against the current requirements, align the declaration with the actual article construction, and re-confirm the migration basis before assuming continued use is covered.
Explore related Bawo-Chem materials
- Photoinitiators — the component group most often reviewed in food-contact ink discussions.
- Full acrylates — acrylate systems used across ink and coating formulations.
- Low-migration UV ink document checklist — the eight document categories a converter should request.
- 2026 compliance map — how REACH, RoHS, PPWR and food-contact rules fit together.
- UV solutions by application — how application conditions shape material choices.
Reviewing a food-contact formulation?
Share the article construction and the jurisdictions in scope. Our team can discuss which material families to evaluate and which evidence to request.
Talk to a formulation engineer